ThruEasi Room Divider - Tribeca 3 Pane Black Clear Reeded Glass Prefinished Double Doors with Single Side

Please click here to find our manufacturers care and decoration advice for this door.

The items making this frame kit for Self-Assembly are either MDF oak veneered, White Primed or Black Primed depending on your chosen product - all options are without any decoration but all MDF sections are pre-drilled ready for making the frame up with ease, the side screen door panel will require to be cut on the bottom edge to suit the frame height and make sure a tight fit is achieved. These are a bespoke product, made for you upon receipt of your order and cannot be cancelled.

Choose wisely...

• Aesthetics: Please note any side screens / insets that are narrower than the door or double door will in some instances have smaller or larger glass widths dependent on your choice, please make sure this is fully understood before purchase as these are a bespoke item and cannot be returned.
• Decoration: Where a product is marked as pre-finished it is to the door only.
• Oak veneer option: MDF frames will be a contrast rather than an exact wooden veneer match with the door.
• White/Black primed option: MDF frames will be supplied with all painted, primed black or grey doors and insets.
• Frame breadth: This is the breadth of the frame from one side of the room to eg; a hallway - 108mm or 133mm.
• Dimensions: We offer several Frame/Side widths, we give the side frame inset size and the door size, the latter with 4mm clearance in height and width, we then show the overall outside WIDTH of the frame from left to right - the TIGHT size, you must allow clearance to fit within your wall space.
• Door position: Double doors are central with side inset screens on the right and on the left, the doors can open towards or away, you decide during installation and set the door stops as required.
  
• Pairmaker: If you require a pairmaker at an extra cost for where the double doors meet in the middle we will adjust the frame overall width by 10mm.
• Fixings: No wall fixings are included - see our "Installation PDF"
• Remember: The doors are not hinged and the view we are showing is for the doors to open away or towards when you hinge them, the side inset requires to be cut to height from the bottom only when you have assembled the frame and are ready to install the side screen
• Fittings: Handles and hinges are not included or pre-machined but lots of options to choose from our massive range of styles and finishes.
  

Any multiple door product, EG; door pairs, sliding double doors, folding doors or double pocket doors are individual doors put together as a product visual, please note we cannot guarantee that the veneers and colour will be an exact match but every care will be taken to provide you with the closest match possible.